Batch Process Electrochlorinator

Batch Process Electrochlorinator

Features:

Titanium Electrolyzer is fixed inside the Reaction tank.
Reaction tank is made of Fiber Glass with Vinyl Ester Resin
Tank is provided with salt measurement and filtering system
Electronic timer for accurate time.
Timer stops automatically during power failure and starts on power supply resumption, to maintain exact batch time.
Eight hours batch time.
The long life Power supply.
Power supply unit can take wide voltage fluctuations and frequency changes.


Application:

Medium to large water treatment facilities for disinfection of drinking water
Waste water, Effluent and Sewage treatment.
Hotels, Hospitals, Educational institutions for Drinking water.
Disinfection in Water parks, Cooling water circuits, Fire water storage tanks

Operation:

Put good clean salt (as indicated on the tank) in the space provided on the top cover of the Reaction tank
Insert the fresh water pipe in the Salt feed opening
Open the water tap and fill the reaction tank up-to the indicated mark.
The water will dissolve the salt as it fills the tank.
Switch on the power supply.
Set the timer at 8 hours.
The system will start and the chlorine production will begin.
After the preset time the power supply will stop.
Now the Sodium Hypochlorite is ready.
Open the bottom Valve and remove all the sodium hypochlorite into a storage tank.
The hypo can be dosed from the storage tank through a Dosing Pump.